Updated  April 5, 2022

Best Mid-Tower PC Cases

Your PC's home will be in one of the top mid-tower cases. You'll have a choice now that GPU stocks are starting to return to normal.

If you're looking to make a statement full-tower cases can make a commanding centerpiece.  That said, a mid-tower case can be equally effective while not taking up your whole desk. Whether you're pulling together a whole new PC, or just jamming in some upgrades, these mid-tower cases will offer plenty of space. It's only once you get down to the best Mini-ITX cases that things really start to get tricky.

When looking for the best mid-tower PC case, there are a few things to look for: easy access to your components, decent fan and radiator support, as well as airflow, and high-quality materials throughout. Oh, and you want it to appear badass as well.

Because it's critical to get the case right—especially if you've spent a lot of money on your new graphics card—we looked at a lot of mid-tower cases and narrowed them down to the most usable, high-quality options. Here are the ones we deemed to be the best after a few rounds of ripping components out and squeezing them back into new cases.

Best mid-tower cases 

Image 1 of 4

 

1. NZXT H710i 

The best mid-tower PC case

SPECIFICATIONS

Form Factor: Mid tower

Motherboard Support: Mini-ITX, MicroATX, ATX and EATX(Up to 272mm or 10.7-inches)

Dimensions: 230 x 516 x 494mm

Weight: 12.3 kg

Radiator Support: Front: 2x 140mm or 3x 120mm with Push/Pull, Top: 2x 140mm or 3 x 120mm, Rear: 1x 120mm or 1x 140mm

I/O Ports: 2x USB 3.1 Type-A Gen 1, 1 x USB 3.1 Type-C Gen 2, 1 x Audio/Mic

Drive Bays: 7x 2.5-inch, 4x 3.5-inch

REASONS TO BUY

+Integrated addressable LED lighting+CAM powered "smart device"+Vertical GPU mount

REASONS TO AVOID

-Smart device not always required

This most recent iteration of NZXT's "smart" chassis brings a couple of new features to help modernize your build. This ultra-clean and uncomplicated mid-tower case emphasizes convenience above all. It includes many of the same trappings as its predecessor, but costs a little bit more and has just a couple of neat changes. The NZXT H710i features a front panel USB 3.1 Type-C port and the ability to vertical mount your GPU with a separate PCIe riser.

The H710i features integrated RGB lighting around the tempered glass side panel, controlled by the NZXT CAM software and a built-in LED lighting hub that allows for easy control of RGB lighting and fan speeds as well. To keep things cool, the H710i features ventilation gutters that run the perimeter of each side of the case, aided by the four 120mm fans included with the case.

Cable routing is where the H710i shines—achieved primarily through a large aluminum slat that allows you to route your cables into the integrated cable channels on the back of the case. This case keeps everything clean and clutter-free, and the velcro straps built into the back help hold everything down. An excellent, and easy alternative to the rubber gasket solution found on some of the best mid-towers.

Image 1 of 6

 

(Image credit: Corsair)

 

(Image credit: Corsair)

 

(Image credit: Corsair)

 

(Image credit: Corsair)

 

(Image credit: Corsair)

 

(Image credit: Corsair)

2. Corsair Airflow 4000D

The best mid-tower case for airflow at a great price

SPECIFICATIONS

Form Factor: Mid-tower

Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX

Dimensions: 453 x 230 x 466mm

Weight: 7.8 kg

Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm

I/O Ports: 1x USB 3.1 Type-C, 1x USB 3.0, 1x Audio/Mic

Drive Bays: 2x 2.5-inch, 2x 3.5-inch

REASONS TO BUY

+Great airflow and good looks+Straightforward to build in +Surprisingly affordable

REASONS TO AVOID

-Little tight for top-mounted radiators

Corsair has made some great chassis over the years, but the look of some of them were starting to take precedence over functionality. That changed with the release of the 4000D Airflow, which shows that the two schools can be combined for a great-looking case that also offers great airflow. The ventilated front panel means the fans can run slower and quieter while offering the same level of cooling over closed off cases. 

Building a system inside the 4000D Airflow is straightforward, with plenty of room where you need it most. The channel in front of and behind the motherboard tray makes routing your main cables that much easier, and there's enough space here for a variety of radiators and cooling setups—you can fit up to a 360mm radiator in the front and 280mm radiator in the roof. Although the latter can be tight against the top of the motherboard, it's still possible. 

You'll find easy-to-remove dust filters on the top, front, and below the PSU for easy cleaning. Popping off the front panel is simple too, which makes installing fans or a radiator that much easier. Overall, it's a reassuring return to form for Corsair. When you consider that all of this can be picked up for well under $100, it's hard to not be impressed by the overall package. It makes for a great home for anything from a simple mid-range build to a high-end powerhouse, and we've used it as the basis for our own mainstream PC Gamer test rig. 

Image 1 of 3

 

(Image credit: Cooler Master)

 

(Image credit: Cooler Master)

 

(Image credit: Cooler Master)

3. Cooler Master SL600M

The best high-end mid-tower

SPECIFICATIONS

Form Factor: Mid-tower

Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX (support upto 12" x 10.7")

Dimensions: 544 x 242 x 573 mm

Weight: 13.6 kg

Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm

I/O Ports: 1x USB 3.1 Type-C, 2x USB 3.0, 2x USB 2.0, 1x Audio/Mic

Drive Bays: 8x 2.5-inch, 4x 3.5-inch

REASONS TO BUY

+Sand-blasted aluminum finish+Excellent GPU cooling+Decent noise reduction

REASONS TO AVOID

-Higher CPU temperatures

The MasterCase SL600M has to be one of Cooler Master's most beautifully designed cases. It features anodized aluminum with a sand-blasted finish and just enough attitude to make it look sleek, futuristic, and elegant, all at once. We were even more impressed once we opened it up to build in it. 

The CM SL600M is the first case we've tested with a vertical chimney design for its cooling that just makes sense and works. Cooler Master went all-in with the SL600M, completely sealing the front and moving the entire PSU shroud and housing from the bottom to the front of the case. All of that newly opened space combined with generous feet allow the case to funnel the airflow directly onto the GPU.

While the CPU temperatures do suffer slightly from this design, the SL600M has the lowest GPU temperatures out of every mid-tower we've tested. Mount the graphics card vertically and away from the glass with the rotatable PCI bracket, and cooling improves even further. While the case features all of the connectivity and convenience you'd expect in a high-end mid-tower, it is, unfortunately, missing an included GPU riser cable.

Read our full Cooler Master MasterCase SL600M review.

Image 1 of 4

 

(Image credit: Cooler Master)

 

(Image credit: Cooler Master)

 

(Image credit: Cooler Master)

 

(Image credit: Cooler Master)

4. Cooler Master H500M

The best mid-tower for bigger builds

SPECIFICATIONS

Form Factor: Mid-tower

Motherboard Support: Mini-ITX, Micro-ATX, ATX, E-ATX (support upto 12" x 10.7")

Dimensions: 544 x 248 x 546mm

Weight: 14.2 kg

Radiator Support: 120mm, 140mm, 240mm, 280mm, 360mm

I/O Ports: 1x USB 3.1 Type-C, 2x USB 3.0, 1x Audio/Mic

Drive Bays: 3x 2.5-inch, 2x 3.5-inch

REASONS TO BUY

+It's massive (supports E-ATX)+High airflow with 2x 200mm RGB fans

REASONS TO AVOID

-Style is hit or miss

Cooler Master's H500M is the company's latest flagship mid-tower, but we'd rather it be called a full-sized tower. Measuring 21.4 x 9.8 x 21.5 inches, the H500M is one of the biggest mid-towers on this list. Thanks to its large size and internal layout, it's straightforward to build in and supports a huge variety of components and custom cooling options.

The H500M comes with two massive 200mm RGB LED fans installed, which do a fantastic job of increasing airflow out of the box. Other modern touches include a USB 3.1 Type-C connector and tons of modularity, including the option to choose between a mesh or tempered glass front panel.

Our only major issue with the case is the lack of easily removable magnetic dust filters for the front fan intake. Luckily, all of the mesh in the entire H500 line features a secondary filter layer that'll help keep dust out of your build. We mention the dust because the H500M features some serious airflow and comes prepared to keep the beefiest of gaming PCs cool.

Best mini-ITX case | Best full tower case | Best CPU cooler | Best DDR4 RAM | Best gaming monitor| Best gaming headset

Image 1 of 4

 

(Image credit: Lian Li)

 

(Image credit: Lian Li)

 

(Image credit: Lian Li)

 

(Image credit: Lian Li)

5. Lian-Li PC-011 Dynamic

The best mid-range mid-tower

SPECIFICATIONS

Form Factor: Mid-tower

Motherboard Support: E-ATX, ATX, M-ATX, mini-ITX

Dimensions: 446 x 272 x 445mm

Weight: 9.7kg

Radiator Support: 120mm, 240mm, 280mm, 360mm

I/O Ports: 2x USB 3.0, 2x HD audio, 1x USB 3.1 Type-C

Drive Bays: 6x 2.5-inch, 3x 3.5-inch

REASONS TO BUY

+Synapse 3-compatible RGB lighting+Plenty of headroom for upgrades

REASONS TO AVOID

-Sharp around the edges

CHIP CHILLERS

Best CPU cooler: keep your chip chilled in style
Best PC fans: super-silent and plastered in RGB
Best PC cases: big, little, and everything in-between.

If you're strapped for vertical space, the Lian-Li PC-011 Dynamic is a short and stubby alternative to some of the more long-necked PC cases we've seen. Although it doesn't come with the most precise instructions given its proprietary lighting tech, it is one of two Razer-designed PC cases in existence. And of the two, this one is the best. 

Featuring a tempered glass design, installing components in the PC-011 is painless. Well, apart from some of the super-sharp angles that might spike the odd finger. You can remove the top and both sides of the chassis for easy access into its internals. Parts of the process that used to be stressful, such as liquid cooler installations, are now stumbling blocks of a bygone era.

Plus, if you're willing to shell out a bit more cash over the vanilla model, the PC-011 comes in a Razer Edition as well. Fully integrated with the San Franciscan company's Synapse 3 lighting software, you can even coordinate it with your other Razer-made peripherals. 

Best mid-tower cases FAQ

Is a mid-tower case big enough?

 

Generally speaking, a mid-tower PC case will house all but the most extreme of system builds. If you're trying to cram in discrete water cooling loops for both your graphics card and high-end CPU, then you might find things are a bit too cramped inside. But for most high-end gaming PCs a mid-tower case will be plenty big enough for your needs.

The thing to keep in mind when looking at the dimensions of a prospective chassis is the length of graphics card you want to put inside, and where you might be mounting any water cooling radiators you might want. If those are going in the front, be aware that will cut down on the space you have for a GPU.

How much should I spend on a mid-tower case?

 

If you want to spend less than $50 on a new chassis you have to be willing to forgo such luxuries as easily accessible dust vents, different front panel connections, or high-end airflow. But things open up once you move into the $50 - $150 region. Once of our favorites, the Corsair 4000D Airflow can be picked up for less than $90 and provides all the extras you could want from a top PC case.

Are bigger cases better?

 

It is possible that a larger case can offer greater cooling, particularly with the potential for more airflow around the main heat generating parts of the PC, such as the CPU and graphics card. But without sufficient fans creating that airflow, and without them being properly positioned, a bigger case can still lead to heat build up.

The main benefit from bigger cases is that they're easier to build into and simpler to upgrade later on down the line.